Toyota timing issue.

Tech talk for those wrench turners on your trail rig.

Moderators: Exec Committee, Mods, Admin

Post Reply
User avatar
donthaveaclue
Unverified Spammer
Posts: 46
Joined: Sun Jun 24, 2018 9:20 pm

Toyota timing issue.

Post by donthaveaclue » Sat Jun 30, 2018 10:52 am

This is my first go around with toyotas. I see no dimple on the crank gear to index the belt. I am also pretty sure that the harmonic balancer should be 1 piece. ImageImageImageImage

Sent from my SM-G955U using Tapatalk


User avatar
donthaveaclue
Unverified Spammer
Posts: 46
Joined: Sun Jun 24, 2018 9:20 pm

Re: Toyota timing issue.

Post by donthaveaclue » Sat Jun 30, 2018 2:42 pm

This post can be disregarded. This project will be going to the scrap yard.

Sent from my SM-G955U using Tapatalk


User avatar
mossytaco
Exec Committee Member
Posts: 1103
Joined: Tue Mar 27, 2012 9:36 pm
Location: Stanton, KY

Re: Toyota timing issue.

Post by mossytaco » Sat Jun 30, 2018 4:24 pm

donthaveaclue wrote:This post can be disregarded. This project will be going to the scrap yard.

Sent from my SM-G955U using Tapatalk
What are you scrapping?

Sent from my SAMSUNG-SM-G930A using Tapatalk


User avatar
donthaveaclue
Unverified Spammer
Posts: 46
Joined: Sun Jun 24, 2018 9:20 pm

Re: Toyota timing issue.

Post by donthaveaclue » Sat Jun 30, 2018 4:33 pm

Drive line to the 4 runner. (Not yet) i think I'll put the body on a gm frame. Itll already be set up for the driveline and a solid front axle. Cheaper to I'd say than messing with a trans adapter and having to build engine mounts/front spring hangers.

Sent from my SM-G955U using Tapatalk


Post Reply